A nanotube-based field-emission flat panel display

Q. H. Wang, A. A. Setlur, J. M. Lauerhaas, J. Y. Dai, E. W. Seelig, Robert P. H. Chang

Research output: Contribution to journalArticle

658 Citations (Scopus)

Abstract

A matrix addressable diode flat panel display has been fabricated using a carbon nanotube-epoxy composite as the electron emission source. Field-emission uniformity has been confirmed by measuring the I-V curves of pixels across the panel. This prototype display demonstrates well-lit pixels under ±150V biasing signals. The "on" and "off" of the pixels are well controlled by the half voltage "off-pixel" method. Further improvement of this technology may lead to easy-to-make and inexpensive flat panel displays.

Original languageEnglish
Pages (from-to)2912-2913
Number of pages2
JournalApplied Physics Letters
Volume72
Issue number22
DOIs
Publication statusPublished - 1998

    Fingerprint

ASJC Scopus subject areas

  • Physics and Astronomy (miscellaneous)

Cite this

Wang, Q. H., Setlur, A. A., Lauerhaas, J. M., Dai, J. Y., Seelig, E. W., & Chang, R. P. H. (1998). A nanotube-based field-emission flat panel display. Applied Physics Letters, 72(22), 2912-2913. https://doi.org/10.1063/1.121493