Abstract
Poly-methylmethacrylate suspended dispersion was used to fabricate multiwalled carbon nanotube (MWCNT) bridges. Using this technique, nanotubes could be suspended between metal electrodes without any chemical etching of the substrate. The electrical measurement on suspended MWCNT bridges shows that the room temperature resistance ranges from under a kω to a few Mω.
| Original language | English |
|---|---|
| Pages (from-to) | 996-999 |
| Number of pages | 4 |
| Journal | Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures |
| Volume | 21 |
| Issue number | 3 |
| Publication status | Published - May 2003 |
Fingerprint
ASJC Scopus subject areas
- Electrical and Electronic Engineering
- Surfaces and Interfaces
- Physics and Astronomy (miscellaneous)
Cite this
Fabrication of multiwalled carbon nanotube bridges by poly-methylmethacrylate suspended dispersion. / Lee, S. B.; Teo, K. B K; Amaratunga, G. A J; Milne, W. I.; Chhowalla, Manish; Hasko, D. G.; Ahmed, H.
In: Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures, Vol. 21, No. 3, 05.2003, p. 996-999.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Fabrication of multiwalled carbon nanotube bridges by poly-methylmethacrylate suspended dispersion
AU - Lee, S. B.
AU - Teo, K. B K
AU - Amaratunga, G. A J
AU - Milne, W. I.
AU - Chhowalla, Manish
AU - Hasko, D. G.
AU - Ahmed, H.
PY - 2003/5
Y1 - 2003/5
N2 - Poly-methylmethacrylate suspended dispersion was used to fabricate multiwalled carbon nanotube (MWCNT) bridges. Using this technique, nanotubes could be suspended between metal electrodes without any chemical etching of the substrate. The electrical measurement on suspended MWCNT bridges shows that the room temperature resistance ranges from under a kω to a few Mω.
AB - Poly-methylmethacrylate suspended dispersion was used to fabricate multiwalled carbon nanotube (MWCNT) bridges. Using this technique, nanotubes could be suspended between metal electrodes without any chemical etching of the substrate. The electrical measurement on suspended MWCNT bridges shows that the room temperature resistance ranges from under a kω to a few Mω.
UR - http://www.scopus.com/inward/record.url?scp=0038457093&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0038457093&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0038457093
VL - 21
SP - 996
EP - 999
JO - Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena
JF - Journal of Vacuum Science & Technology B: Microelectronics Processing and Phenomena
SN - 1071-1023
IS - 3
ER -