Methods for comparing the performance of energy-conversion systems for use in solar fuels and solar electricity generation

Robert H. Coridan, Adam C. Nielander, Sonja A. Francis, Matthew T. McDowell, Victoria Dix, Shawn M. Chatman, Nathan S Lewis

Research output: Contribution to journalArticle

100 Citations (Scopus)

Abstract

The energy-conversion efficiency is a key metric that facilitates comparison of the performance of various approaches to solar energy conversion. However, a suite of disparate methodologies has been proposed and used historically to evaluate the efficiency of systems that produce fuels, either directly or indirectly, with sunlight and/or electrical power as the system inputs. A general expression for the system efficiency is given as the ratio of the total output power (electrical plus chemical) divided by the total input power (electrical plus solar). The solar-to-hydrogen (STH) efficiency follows from this globally applicable system efficiency but only is applicable in the special case for systems in which the only input power is sunlight and the only output power is in the form of hydrogen fuel derived from solar-driven water splitting. Herein, system-level efficiencies, beyond the STH efficiency, as well as component-level figures of merit are defined and discussed to describe the relative energy-conversion performance of key photoactive components of complete systems. These figures of merit facilitate the comparison of electrode materials and interfaces without conflating their fundamental properties with the engineering of the cell setup. The resulting information about the components can then be used in conjunction with a graphical circuit analysis formalism to obtain "optimal" system efficiencies that can be compared between various approaches. The approach provides a consistent method for comparison of the performance at the system and component levels of various technologies that produce fuels and/or electricity from sunlight.

Original languageEnglish
Pages (from-to)2886-2901
Number of pages16
JournalEnergy and Environmental Science
Volume8
Issue number10
DOIs
Publication statusPublished - Oct 1 2015

Fingerprint

electrical power
electricity generation
Energy conversion
Electricity
hydrogen
electricity
electrode
Hydrogen
engineering
methodology
Optimal systems
Hydrogen fuels
Electric network analysis
comparison
method
energy conversion
Solar energy
Conversion efficiency
water
Electrodes

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Environmental Chemistry
  • Pollution
  • Nuclear Energy and Engineering

Cite this

Methods for comparing the performance of energy-conversion systems for use in solar fuels and solar electricity generation. / Coridan, Robert H.; Nielander, Adam C.; Francis, Sonja A.; McDowell, Matthew T.; Dix, Victoria; Chatman, Shawn M.; Lewis, Nathan S.

In: Energy and Environmental Science, Vol. 8, No. 10, 01.10.2015, p. 2886-2901.

Research output: Contribution to journalArticle

Coridan, Robert H. ; Nielander, Adam C. ; Francis, Sonja A. ; McDowell, Matthew T. ; Dix, Victoria ; Chatman, Shawn M. ; Lewis, Nathan S. / Methods for comparing the performance of energy-conversion systems for use in solar fuels and solar electricity generation. In: Energy and Environmental Science. 2015 ; Vol. 8, No. 10. pp. 2886-2901.
@article{10982492355b45fc838457a3f31e2745,
title = "Methods for comparing the performance of energy-conversion systems for use in solar fuels and solar electricity generation",
abstract = "The energy-conversion efficiency is a key metric that facilitates comparison of the performance of various approaches to solar energy conversion. However, a suite of disparate methodologies has been proposed and used historically to evaluate the efficiency of systems that produce fuels, either directly or indirectly, with sunlight and/or electrical power as the system inputs. A general expression for the system efficiency is given as the ratio of the total output power (electrical plus chemical) divided by the total input power (electrical plus solar). The solar-to-hydrogen (STH) efficiency follows from this globally applicable system efficiency but only is applicable in the special case for systems in which the only input power is sunlight and the only output power is in the form of hydrogen fuel derived from solar-driven water splitting. Herein, system-level efficiencies, beyond the STH efficiency, as well as component-level figures of merit are defined and discussed to describe the relative energy-conversion performance of key photoactive components of complete systems. These figures of merit facilitate the comparison of electrode materials and interfaces without conflating their fundamental properties with the engineering of the cell setup. The resulting information about the components can then be used in conjunction with a graphical circuit analysis formalism to obtain {"}optimal{"} system efficiencies that can be compared between various approaches. The approach provides a consistent method for comparison of the performance at the system and component levels of various technologies that produce fuels and/or electricity from sunlight.",
author = "Coridan, {Robert H.} and Nielander, {Adam C.} and Francis, {Sonja A.} and McDowell, {Matthew T.} and Victoria Dix and Chatman, {Shawn M.} and Lewis, {Nathan S}",
year = "2015",
month = "10",
day = "1",
doi = "10.1039/c5ee00777a",
language = "English",
volume = "8",
pages = "2886--2901",
journal = "Energy and Environmental Science",
issn = "1754-5692",
publisher = "Royal Society of Chemistry",
number = "10",

}

TY - JOUR

T1 - Methods for comparing the performance of energy-conversion systems for use in solar fuels and solar electricity generation

AU - Coridan, Robert H.

AU - Nielander, Adam C.

AU - Francis, Sonja A.

AU - McDowell, Matthew T.

AU - Dix, Victoria

AU - Chatman, Shawn M.

AU - Lewis, Nathan S

PY - 2015/10/1

Y1 - 2015/10/1

N2 - The energy-conversion efficiency is a key metric that facilitates comparison of the performance of various approaches to solar energy conversion. However, a suite of disparate methodologies has been proposed and used historically to evaluate the efficiency of systems that produce fuels, either directly or indirectly, with sunlight and/or electrical power as the system inputs. A general expression for the system efficiency is given as the ratio of the total output power (electrical plus chemical) divided by the total input power (electrical plus solar). The solar-to-hydrogen (STH) efficiency follows from this globally applicable system efficiency but only is applicable in the special case for systems in which the only input power is sunlight and the only output power is in the form of hydrogen fuel derived from solar-driven water splitting. Herein, system-level efficiencies, beyond the STH efficiency, as well as component-level figures of merit are defined and discussed to describe the relative energy-conversion performance of key photoactive components of complete systems. These figures of merit facilitate the comparison of electrode materials and interfaces without conflating their fundamental properties with the engineering of the cell setup. The resulting information about the components can then be used in conjunction with a graphical circuit analysis formalism to obtain "optimal" system efficiencies that can be compared between various approaches. The approach provides a consistent method for comparison of the performance at the system and component levels of various technologies that produce fuels and/or electricity from sunlight.

AB - The energy-conversion efficiency is a key metric that facilitates comparison of the performance of various approaches to solar energy conversion. However, a suite of disparate methodologies has been proposed and used historically to evaluate the efficiency of systems that produce fuels, either directly or indirectly, with sunlight and/or electrical power as the system inputs. A general expression for the system efficiency is given as the ratio of the total output power (electrical plus chemical) divided by the total input power (electrical plus solar). The solar-to-hydrogen (STH) efficiency follows from this globally applicable system efficiency but only is applicable in the special case for systems in which the only input power is sunlight and the only output power is in the form of hydrogen fuel derived from solar-driven water splitting. Herein, system-level efficiencies, beyond the STH efficiency, as well as component-level figures of merit are defined and discussed to describe the relative energy-conversion performance of key photoactive components of complete systems. These figures of merit facilitate the comparison of electrode materials and interfaces without conflating their fundamental properties with the engineering of the cell setup. The resulting information about the components can then be used in conjunction with a graphical circuit analysis formalism to obtain "optimal" system efficiencies that can be compared between various approaches. The approach provides a consistent method for comparison of the performance at the system and component levels of various technologies that produce fuels and/or electricity from sunlight.

UR - http://www.scopus.com/inward/record.url?scp=84938654811&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84938654811&partnerID=8YFLogxK

U2 - 10.1039/c5ee00777a

DO - 10.1039/c5ee00777a

M3 - Article

VL - 8

SP - 2886

EP - 2901

JO - Energy and Environmental Science

JF - Energy and Environmental Science

SN - 1754-5692

IS - 10

ER -