Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO 3 (001)

Steven T. Christensen, Jeffrey W. Elam, Byeongdu Lee, Zhenxing Feng, Michael J. Bedzyk, Mark C Hersam

Research output: Contribution to journalArticle

58 Citations (Scopus)

Abstract

The early stages of nucleation and growth of atomic layer deposition (ALD) platinum on SrTiO3 (001) have been studied. Scanning electron microscopy reveals the ALD Pt deposits as discrete nanoparticles that grow and coalesce with increasing number of ALD cycles, ultimately resulting in a continuous film after ̃40 cycles. Atomic force microscopy shows the films to be fine-grained and highly conformal such that the 0.4 nm atomic steps of the underlying SrTiO 3 (001) surface remain visible even after 80 Pt ALD cycles. Grazing-incidence small-angle X-ray scattering (GISAXS) studies demonstrate that the early stages of Pt ALD yields nanoparticles that are well approximated as cylinders with a height to radius ratio that is nearly unity. Consistent with nanoparticle coalescence, GISAXS also reveals an interparticle spacing that increases with the number of ALD cycles. X-ray fluorescence measurements of the Pt coverage reveal growth dynamics in which the Pt deposition is initially faster than the steady-state growth rate that emerges after 40-70 ALD cycles. These experimental results are understood through the application of a model that suggests that the SrTiO 3 surface is more reactive than the Pt species and that Pt diffusion is operative in nanoparticle formation. Overall, this study delineates ALD growth conditions for forming either Pt nanoparticles or continuous Pt thin films on SrTiO 3 (001), thus presenting potentially useful substrates for catalysis and microelectronics, respectively.

Original languageEnglish
Pages (from-to)516-521
Number of pages6
JournalChemistry of Materials
Volume21
Issue number3
DOIs
Publication statusPublished - Feb 10 2009

Fingerprint

Atomic layer deposition
Platinum
Nanoparticles
X ray scattering
Coalescence
Microelectronics
Catalysis
Atomic force microscopy
Nucleation
Deposits
Fluorescence
X rays
Thin films
Scanning electron microscopy
Substrates

ASJC Scopus subject areas

  • Materials Chemistry
  • Chemical Engineering(all)
  • Chemistry(all)

Cite this

Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO 3 (001). / Christensen, Steven T.; Elam, Jeffrey W.; Lee, Byeongdu; Feng, Zhenxing; Bedzyk, Michael J.; Hersam, Mark C.

In: Chemistry of Materials, Vol. 21, No. 3, 10.02.2009, p. 516-521.

Research output: Contribution to journalArticle

Christensen, Steven T. ; Elam, Jeffrey W. ; Lee, Byeongdu ; Feng, Zhenxing ; Bedzyk, Michael J. ; Hersam, Mark C. / Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO 3 (001). In: Chemistry of Materials. 2009 ; Vol. 21, No. 3. pp. 516-521.
@article{ba8462db07434ba1a09f39d6a562bd34,
title = "Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO 3 (001)",
abstract = "The early stages of nucleation and growth of atomic layer deposition (ALD) platinum on SrTiO3 (001) have been studied. Scanning electron microscopy reveals the ALD Pt deposits as discrete nanoparticles that grow and coalesce with increasing number of ALD cycles, ultimately resulting in a continuous film after ̃40 cycles. Atomic force microscopy shows the films to be fine-grained and highly conformal such that the 0.4 nm atomic steps of the underlying SrTiO 3 (001) surface remain visible even after 80 Pt ALD cycles. Grazing-incidence small-angle X-ray scattering (GISAXS) studies demonstrate that the early stages of Pt ALD yields nanoparticles that are well approximated as cylinders with a height to radius ratio that is nearly unity. Consistent with nanoparticle coalescence, GISAXS also reveals an interparticle spacing that increases with the number of ALD cycles. X-ray fluorescence measurements of the Pt coverage reveal growth dynamics in which the Pt deposition is initially faster than the steady-state growth rate that emerges after 40-70 ALD cycles. These experimental results are understood through the application of a model that suggests that the SrTiO 3 surface is more reactive than the Pt species and that Pt diffusion is operative in nanoparticle formation. Overall, this study delineates ALD growth conditions for forming either Pt nanoparticles or continuous Pt thin films on SrTiO 3 (001), thus presenting potentially useful substrates for catalysis and microelectronics, respectively.",
author = "Christensen, {Steven T.} and Elam, {Jeffrey W.} and Byeongdu Lee and Zhenxing Feng and Bedzyk, {Michael J.} and Hersam, {Mark C}",
year = "2009",
month = "2",
day = "10",
doi = "10.1021/cm8026863",
language = "English",
volume = "21",
pages = "516--521",
journal = "Chemistry of Materials",
issn = "0897-4756",
publisher = "American Chemical Society",
number = "3",

}

TY - JOUR

T1 - Nanoscale structure and morphology of atomic layer deposition platinum on SrTiO 3 (001)

AU - Christensen, Steven T.

AU - Elam, Jeffrey W.

AU - Lee, Byeongdu

AU - Feng, Zhenxing

AU - Bedzyk, Michael J.

AU - Hersam, Mark C

PY - 2009/2/10

Y1 - 2009/2/10

N2 - The early stages of nucleation and growth of atomic layer deposition (ALD) platinum on SrTiO3 (001) have been studied. Scanning electron microscopy reveals the ALD Pt deposits as discrete nanoparticles that grow and coalesce with increasing number of ALD cycles, ultimately resulting in a continuous film after ̃40 cycles. Atomic force microscopy shows the films to be fine-grained and highly conformal such that the 0.4 nm atomic steps of the underlying SrTiO 3 (001) surface remain visible even after 80 Pt ALD cycles. Grazing-incidence small-angle X-ray scattering (GISAXS) studies demonstrate that the early stages of Pt ALD yields nanoparticles that are well approximated as cylinders with a height to radius ratio that is nearly unity. Consistent with nanoparticle coalescence, GISAXS also reveals an interparticle spacing that increases with the number of ALD cycles. X-ray fluorescence measurements of the Pt coverage reveal growth dynamics in which the Pt deposition is initially faster than the steady-state growth rate that emerges after 40-70 ALD cycles. These experimental results are understood through the application of a model that suggests that the SrTiO 3 surface is more reactive than the Pt species and that Pt diffusion is operative in nanoparticle formation. Overall, this study delineates ALD growth conditions for forming either Pt nanoparticles or continuous Pt thin films on SrTiO 3 (001), thus presenting potentially useful substrates for catalysis and microelectronics, respectively.

AB - The early stages of nucleation and growth of atomic layer deposition (ALD) platinum on SrTiO3 (001) have been studied. Scanning electron microscopy reveals the ALD Pt deposits as discrete nanoparticles that grow and coalesce with increasing number of ALD cycles, ultimately resulting in a continuous film after ̃40 cycles. Atomic force microscopy shows the films to be fine-grained and highly conformal such that the 0.4 nm atomic steps of the underlying SrTiO 3 (001) surface remain visible even after 80 Pt ALD cycles. Grazing-incidence small-angle X-ray scattering (GISAXS) studies demonstrate that the early stages of Pt ALD yields nanoparticles that are well approximated as cylinders with a height to radius ratio that is nearly unity. Consistent with nanoparticle coalescence, GISAXS also reveals an interparticle spacing that increases with the number of ALD cycles. X-ray fluorescence measurements of the Pt coverage reveal growth dynamics in which the Pt deposition is initially faster than the steady-state growth rate that emerges after 40-70 ALD cycles. These experimental results are understood through the application of a model that suggests that the SrTiO 3 surface is more reactive than the Pt species and that Pt diffusion is operative in nanoparticle formation. Overall, this study delineates ALD growth conditions for forming either Pt nanoparticles or continuous Pt thin films on SrTiO 3 (001), thus presenting potentially useful substrates for catalysis and microelectronics, respectively.

UR - http://www.scopus.com/inward/record.url?scp=61849145662&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=61849145662&partnerID=8YFLogxK

U2 - 10.1021/cm8026863

DO - 10.1021/cm8026863

M3 - Article

VL - 21

SP - 516

EP - 521

JO - Chemistry of Materials

JF - Chemistry of Materials

SN - 0897-4756

IS - 3

ER -