Scuffing failure in heavily loaded slow speed conformal sliding contacts

M. C. Shen, H. S. Cheng, Peter C Stair

Research output: Contribution to journalArticle

10 Citations (Scopus)

Abstract

Scuffing failure phenomenon is studied experimentally in heavily loaded slow speed conformal sliding contacts of two flat thrust washers in a regime close to boundary lubricated condition. Lubricants used are base oils of pure mineral oil and poly-α-olefin (PAO). Speed range is 0.76-33.0 cm/s. Material studied is hardened 52100 steel for both washers in contact. Scuffing threshold load at failure, friction, and surface bulk temperature are major data measured. The surface total temperature is determined with the measure bulk temperature in addition to the surface flash temperature calculated using Jaeger’s theory. Characteristic scuff ing failure mechanisms are categorized in terms of various speed ranges. A simple model is proposed to predict scuffing failure based on theories in adsorption/desorption dominated lubricated wear and metal oxide formation kinetics. Good agreement is found between experimental data and theoretical prediction in terms of threshold load in certain speed range.

Original languageEnglish
Pages (from-to)182-191
Number of pages10
JournalJournal of Tribology
Volume113
Issue number1
DOIs
Publication statusPublished - Jan 1 1991

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

Fingerprint Dive into the research topics of 'Scuffing failure in heavily loaded slow speed conformal sliding contacts'. Together they form a unique fingerprint.

  • Cite this