Solid cocatalysts for activating manganese triazacyclononane oxidation catalysts

Nicholas J. Schoenfeldt, Justin M Notestein

Research output: Contribution to journalArticle

14 Citations (Scopus)

Abstract

Immobilizing a homogeneous catalyst provides obvious handling benefits, but ideally can also enhance catalyst productivity or selectivity because of beneficial interactions between the surface and the active site. Here, Mn 1,4,7-trimethyl-1,4,7-triazacyclononane dimers (1) are activated by carboxylate-containing solids for cyclooctene epoxidation/dihydroxylation with H2O2 at 0 °C. The productivity (TON, moles per mole 1) and selectivity (to cis-diol) of cyclooctene oxidation by 1 are known to be tuned by choice of soluble carboxylate cocatalyst, and this concept is extended here to solid carboxylate cocatalysts. These solid cocatalysts are synthesized by covalently grafting benzoate and propanoate silanes to SiO2 or allowing terephthalic acid or dihydroxyhydrocinnamic acid to chemisorb on oxides. Comparing analogous structures, SiO2-grafted carboxylates outperform soluble benzoic acid (275 vs 25 TON at 2 equiv), hydrocinnamic acid (150 vs 40 TON at 2 equiv), and valeric acid (675 vs 70 TON at 10 equiv). Of the oxides tested as modifiers for carboxylate cocatalysts, TiO2 leads to the largest improvements in oxidation productivity, boosting productivity to 300 TON when combined with 2 equiv of benzoic acid and to 425 TON when combined with ditopic terephthalic acid. The latter enhancement may be due to both a buffering effect and a high surface concentration of chemisorbed species that encourages formation of the presumed carboxylate-bridged active state of the catalyst. Dihydroxylation selectivities are a function of the carboxylate employed as well as the nature of the other groups on the solid cocatalyst surface. SiO2 grafted with propionate groups gives ∼50% cis-diol selectivity, but further modification with alkyl or perfluoroalkyl silanes increase cis-diol selectivity up to ∼60%. Dihydroxylation selectivity is also ∼60% for SiO2 grafted with benzoate or ∼70% for terephthalic acid chemisorbed on TiO2. These solid cocatalysts introduce a number of additional tunable parameters that lead to enhanced productivity or selectivity for molecular oxidation catalysts like 1 that are activated by carboxylates.

Original languageEnglish
Pages (from-to)1691-1701
Number of pages11
JournalACS Catalysis
Volume1
Issue number12
DOIs
Publication statusPublished - Dec 2 2011

Fingerprint

Manganese
Productivity
Catalyst selectivity
Oxidation
Catalysts
Acids
Silanes
Benzoic Acid
Benzoates
Propionates
Benzoic acid
Oxides
Epoxidation
Dimers
triazacyclononane
terephthalic acid

Keywords

  • cis-dihydroxylation
  • epoxidation
  • grafted
  • grafting
  • HO
  • heterogeneous
  • hydrogen peroxide
  • low-temperature
  • self-assembled
  • singlesite

ASJC Scopus subject areas

  • Catalysis

Cite this

Solid cocatalysts for activating manganese triazacyclononane oxidation catalysts. / Schoenfeldt, Nicholas J.; Notestein, Justin M.

In: ACS Catalysis, Vol. 1, No. 12, 02.12.2011, p. 1691-1701.

Research output: Contribution to journalArticle

@article{9f8cd6e777454ae4b0f2384269b7cb52,
title = "Solid cocatalysts for activating manganese triazacyclononane oxidation catalysts",
abstract = "Immobilizing a homogeneous catalyst provides obvious handling benefits, but ideally can also enhance catalyst productivity or selectivity because of beneficial interactions between the surface and the active site. Here, Mn 1,4,7-trimethyl-1,4,7-triazacyclononane dimers (1) are activated by carboxylate-containing solids for cyclooctene epoxidation/dihydroxylation with H2O2 at 0 °C. The productivity (TON, moles per mole 1) and selectivity (to cis-diol) of cyclooctene oxidation by 1 are known to be tuned by choice of soluble carboxylate cocatalyst, and this concept is extended here to solid carboxylate cocatalysts. These solid cocatalysts are synthesized by covalently grafting benzoate and propanoate silanes to SiO2 or allowing terephthalic acid or dihydroxyhydrocinnamic acid to chemisorb on oxides. Comparing analogous structures, SiO2-grafted carboxylates outperform soluble benzoic acid (275 vs 25 TON at 2 equiv), hydrocinnamic acid (150 vs 40 TON at 2 equiv), and valeric acid (675 vs 70 TON at 10 equiv). Of the oxides tested as modifiers for carboxylate cocatalysts, TiO2 leads to the largest improvements in oxidation productivity, boosting productivity to 300 TON when combined with 2 equiv of benzoic acid and to 425 TON when combined with ditopic terephthalic acid. The latter enhancement may be due to both a buffering effect and a high surface concentration of chemisorbed species that encourages formation of the presumed carboxylate-bridged active state of the catalyst. Dihydroxylation selectivities are a function of the carboxylate employed as well as the nature of the other groups on the solid cocatalyst surface. SiO2 grafted with propionate groups gives ∼50{\%} cis-diol selectivity, but further modification with alkyl or perfluoroalkyl silanes increase cis-diol selectivity up to ∼60{\%}. Dihydroxylation selectivity is also ∼60{\%} for SiO2 grafted with benzoate or ∼70{\%} for terephthalic acid chemisorbed on TiO2. These solid cocatalysts introduce a number of additional tunable parameters that lead to enhanced productivity or selectivity for molecular oxidation catalysts like 1 that are activated by carboxylates.",
keywords = "cis-dihydroxylation, epoxidation, grafted, grafting, HO, heterogeneous, hydrogen peroxide, low-temperature, self-assembled, singlesite",
author = "Schoenfeldt, {Nicholas J.} and Notestein, {Justin M}",
year = "2011",
month = "12",
day = "2",
doi = "10.1021/cs200353x",
language = "English",
volume = "1",
pages = "1691--1701",
journal = "ACS Catalysis",
issn = "2155-5435",
publisher = "American Chemical Society",
number = "12",

}

TY - JOUR

T1 - Solid cocatalysts for activating manganese triazacyclononane oxidation catalysts

AU - Schoenfeldt, Nicholas J.

AU - Notestein, Justin M

PY - 2011/12/2

Y1 - 2011/12/2

N2 - Immobilizing a homogeneous catalyst provides obvious handling benefits, but ideally can also enhance catalyst productivity or selectivity because of beneficial interactions between the surface and the active site. Here, Mn 1,4,7-trimethyl-1,4,7-triazacyclononane dimers (1) are activated by carboxylate-containing solids for cyclooctene epoxidation/dihydroxylation with H2O2 at 0 °C. The productivity (TON, moles per mole 1) and selectivity (to cis-diol) of cyclooctene oxidation by 1 are known to be tuned by choice of soluble carboxylate cocatalyst, and this concept is extended here to solid carboxylate cocatalysts. These solid cocatalysts are synthesized by covalently grafting benzoate and propanoate silanes to SiO2 or allowing terephthalic acid or dihydroxyhydrocinnamic acid to chemisorb on oxides. Comparing analogous structures, SiO2-grafted carboxylates outperform soluble benzoic acid (275 vs 25 TON at 2 equiv), hydrocinnamic acid (150 vs 40 TON at 2 equiv), and valeric acid (675 vs 70 TON at 10 equiv). Of the oxides tested as modifiers for carboxylate cocatalysts, TiO2 leads to the largest improvements in oxidation productivity, boosting productivity to 300 TON when combined with 2 equiv of benzoic acid and to 425 TON when combined with ditopic terephthalic acid. The latter enhancement may be due to both a buffering effect and a high surface concentration of chemisorbed species that encourages formation of the presumed carboxylate-bridged active state of the catalyst. Dihydroxylation selectivities are a function of the carboxylate employed as well as the nature of the other groups on the solid cocatalyst surface. SiO2 grafted with propionate groups gives ∼50% cis-diol selectivity, but further modification with alkyl or perfluoroalkyl silanes increase cis-diol selectivity up to ∼60%. Dihydroxylation selectivity is also ∼60% for SiO2 grafted with benzoate or ∼70% for terephthalic acid chemisorbed on TiO2. These solid cocatalysts introduce a number of additional tunable parameters that lead to enhanced productivity or selectivity for molecular oxidation catalysts like 1 that are activated by carboxylates.

AB - Immobilizing a homogeneous catalyst provides obvious handling benefits, but ideally can also enhance catalyst productivity or selectivity because of beneficial interactions between the surface and the active site. Here, Mn 1,4,7-trimethyl-1,4,7-triazacyclononane dimers (1) are activated by carboxylate-containing solids for cyclooctene epoxidation/dihydroxylation with H2O2 at 0 °C. The productivity (TON, moles per mole 1) and selectivity (to cis-diol) of cyclooctene oxidation by 1 are known to be tuned by choice of soluble carboxylate cocatalyst, and this concept is extended here to solid carboxylate cocatalysts. These solid cocatalysts are synthesized by covalently grafting benzoate and propanoate silanes to SiO2 or allowing terephthalic acid or dihydroxyhydrocinnamic acid to chemisorb on oxides. Comparing analogous structures, SiO2-grafted carboxylates outperform soluble benzoic acid (275 vs 25 TON at 2 equiv), hydrocinnamic acid (150 vs 40 TON at 2 equiv), and valeric acid (675 vs 70 TON at 10 equiv). Of the oxides tested as modifiers for carboxylate cocatalysts, TiO2 leads to the largest improvements in oxidation productivity, boosting productivity to 300 TON when combined with 2 equiv of benzoic acid and to 425 TON when combined with ditopic terephthalic acid. The latter enhancement may be due to both a buffering effect and a high surface concentration of chemisorbed species that encourages formation of the presumed carboxylate-bridged active state of the catalyst. Dihydroxylation selectivities are a function of the carboxylate employed as well as the nature of the other groups on the solid cocatalyst surface. SiO2 grafted with propionate groups gives ∼50% cis-diol selectivity, but further modification with alkyl or perfluoroalkyl silanes increase cis-diol selectivity up to ∼60%. Dihydroxylation selectivity is also ∼60% for SiO2 grafted with benzoate or ∼70% for terephthalic acid chemisorbed on TiO2. These solid cocatalysts introduce a number of additional tunable parameters that lead to enhanced productivity or selectivity for molecular oxidation catalysts like 1 that are activated by carboxylates.

KW - cis-dihydroxylation

KW - epoxidation

KW - grafted

KW - grafting

KW - HO

KW - heterogeneous

KW - hydrogen peroxide

KW - low-temperature

KW - self-assembled

KW - singlesite

UR - http://www.scopus.com/inward/record.url?scp=82955187903&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=82955187903&partnerID=8YFLogxK

U2 - 10.1021/cs200353x

DO - 10.1021/cs200353x

M3 - Article

VL - 1

SP - 1691

EP - 1701

JO - ACS Catalysis

JF - ACS Catalysis

SN - 2155-5435

IS - 12

ER -