Surface Oxide Removal for Polycrystalline SnSe Reveals Near-Single-Crystal Thermoelectric Performance

Yong Kyu Lee, Zhongzhen Luo, Sung Pyo Cho, Mercouri G Kanatzidis, In Chung

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

Tin selenide (SnSe) has emerged as a surprising new material with exceptional thermal transport and charge transport properties such as ultralow thermal conductivity, which give it a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 at around 800 K. These properties, however, have been only observable in well-prepared and properly handled single-crystal samples. Polycrystalline SnSe samples have markedly inferior properties paradoxically with higher apparent thermal conductivity and much lower ZT values than single crystals. The high thermal conductivity in polycrystalline samples has been attributed to surface tin oxides. Based on this hypothesis, we have employed an oxide-removing strategy that involves a chemical reduction process at 613 K under a 4% H 2 /Ar atmosphere. This leads to an exceptionally low lattice thermal conductivity of ∼0.11 W m −1 K −1 in polycrystalline hole-doped SnSe alloyed with 5% lead selenide, even lower than that of single crystals, and boosts the ZT to ∼2.5 at 773 K. Well prepared and properly handled single-crystal SnSe samples exhibit exceptional thermoelectric performance with a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 due to the ultralow thermal conductivity. Achieving comparable thermoelectric performance to single crystals in polycrystalline SnSe samples has been the widely sought-after goal. These properties, however, have never been achievable in the polycrystalline samples. Particularly, serious debates have arisen on markedly higher apparent thermal conductivity for the latter. Here, we show that the underperformance of polycrystalline SnSe is mainly due to the presence of tin oxides in the sample. Our H 2 reduction process removes the majority of tin oxide films that ubiquitously cover SnSe grains and eventually unveils the ultralow thermal conductivity intrinsic in this material. It also simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high ZT of ∼2.5 at 773 K. Nearly intrinsic charge and thermal transport properties of polycrystalline SnSe materials are unveiled for the first time. We confirm that tin oxide layers on the surface of SnSe powder are the origin of paradoxically higher apparent thermal conductivity in polycrystalline samples over single crystal. Our surface oxide removing strategy on polycrystalline SnSe materials reveals even lower thermal conductivity than single-crystal samples and simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high thermoelectric figure of merit (ZT) of ∼2.5.

Original languageEnglish
Pages (from-to)719-731
Number of pages13
JournalJoule
Volume3
Issue number3
DOIs
Publication statusPublished - Mar 20 2019

Fingerprint

Thermal conductivity
Single crystals
Oxides
Tin oxides
Polycrystalline materials
Hole mobility
Seebeck coefficient
Transport properties
Tin
Oxide films
Charge transfer
Lead
Powders

Keywords

  • polycrystalline SnSe
  • surface oxide
  • thermoelectric
  • ultralow thermal conductivity
  • waste heat

ASJC Scopus subject areas

  • Energy(all)

Cite this

Surface Oxide Removal for Polycrystalline SnSe Reveals Near-Single-Crystal Thermoelectric Performance. / Lee, Yong Kyu; Luo, Zhongzhen; Cho, Sung Pyo; Kanatzidis, Mercouri G; Chung, In.

In: Joule, Vol. 3, No. 3, 20.03.2019, p. 719-731.

Research output: Contribution to journalArticle

Lee, Yong Kyu ; Luo, Zhongzhen ; Cho, Sung Pyo ; Kanatzidis, Mercouri G ; Chung, In. / Surface Oxide Removal for Polycrystalline SnSe Reveals Near-Single-Crystal Thermoelectric Performance. In: Joule. 2019 ; Vol. 3, No. 3. pp. 719-731.
@article{ca42d4133104437db92a1849b1b02db2,
title = "Surface Oxide Removal for Polycrystalline SnSe Reveals Near-Single-Crystal Thermoelectric Performance",
abstract = "Tin selenide (SnSe) has emerged as a surprising new material with exceptional thermal transport and charge transport properties such as ultralow thermal conductivity, which give it a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 at around 800 K. These properties, however, have been only observable in well-prepared and properly handled single-crystal samples. Polycrystalline SnSe samples have markedly inferior properties paradoxically with higher apparent thermal conductivity and much lower ZT values than single crystals. The high thermal conductivity in polycrystalline samples has been attributed to surface tin oxides. Based on this hypothesis, we have employed an oxide-removing strategy that involves a chemical reduction process at 613 K under a 4{\%} H 2 /Ar atmosphere. This leads to an exceptionally low lattice thermal conductivity of ∼0.11 W m −1 K −1 in polycrystalline hole-doped SnSe alloyed with 5{\%} lead selenide, even lower than that of single crystals, and boosts the ZT to ∼2.5 at 773 K. Well prepared and properly handled single-crystal SnSe samples exhibit exceptional thermoelectric performance with a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 due to the ultralow thermal conductivity. Achieving comparable thermoelectric performance to single crystals in polycrystalline SnSe samples has been the widely sought-after goal. These properties, however, have never been achievable in the polycrystalline samples. Particularly, serious debates have arisen on markedly higher apparent thermal conductivity for the latter. Here, we show that the underperformance of polycrystalline SnSe is mainly due to the presence of tin oxides in the sample. Our H 2 reduction process removes the majority of tin oxide films that ubiquitously cover SnSe grains and eventually unveils the ultralow thermal conductivity intrinsic in this material. It also simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high ZT of ∼2.5 at 773 K. Nearly intrinsic charge and thermal transport properties of polycrystalline SnSe materials are unveiled for the first time. We confirm that tin oxide layers on the surface of SnSe powder are the origin of paradoxically higher apparent thermal conductivity in polycrystalline samples over single crystal. Our surface oxide removing strategy on polycrystalline SnSe materials reveals even lower thermal conductivity than single-crystal samples and simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high thermoelectric figure of merit (ZT) of ∼2.5.",
keywords = "polycrystalline SnSe, surface oxide, thermoelectric, ultralow thermal conductivity, waste heat",
author = "Lee, {Yong Kyu} and Zhongzhen Luo and Cho, {Sung Pyo} and Kanatzidis, {Mercouri G} and In Chung",
year = "2019",
month = "3",
day = "20",
doi = "10.1016/j.joule.2019.01.001",
language = "English",
volume = "3",
pages = "719--731",
journal = "Joule",
issn = "2542-4351",
publisher = "Cell Press",
number = "3",

}

TY - JOUR

T1 - Surface Oxide Removal for Polycrystalline SnSe Reveals Near-Single-Crystal Thermoelectric Performance

AU - Lee, Yong Kyu

AU - Luo, Zhongzhen

AU - Cho, Sung Pyo

AU - Kanatzidis, Mercouri G

AU - Chung, In

PY - 2019/3/20

Y1 - 2019/3/20

N2 - Tin selenide (SnSe) has emerged as a surprising new material with exceptional thermal transport and charge transport properties such as ultralow thermal conductivity, which give it a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 at around 800 K. These properties, however, have been only observable in well-prepared and properly handled single-crystal samples. Polycrystalline SnSe samples have markedly inferior properties paradoxically with higher apparent thermal conductivity and much lower ZT values than single crystals. The high thermal conductivity in polycrystalline samples has been attributed to surface tin oxides. Based on this hypothesis, we have employed an oxide-removing strategy that involves a chemical reduction process at 613 K under a 4% H 2 /Ar atmosphere. This leads to an exceptionally low lattice thermal conductivity of ∼0.11 W m −1 K −1 in polycrystalline hole-doped SnSe alloyed with 5% lead selenide, even lower than that of single crystals, and boosts the ZT to ∼2.5 at 773 K. Well prepared and properly handled single-crystal SnSe samples exhibit exceptional thermoelectric performance with a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 due to the ultralow thermal conductivity. Achieving comparable thermoelectric performance to single crystals in polycrystalline SnSe samples has been the widely sought-after goal. These properties, however, have never been achievable in the polycrystalline samples. Particularly, serious debates have arisen on markedly higher apparent thermal conductivity for the latter. Here, we show that the underperformance of polycrystalline SnSe is mainly due to the presence of tin oxides in the sample. Our H 2 reduction process removes the majority of tin oxide films that ubiquitously cover SnSe grains and eventually unveils the ultralow thermal conductivity intrinsic in this material. It also simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high ZT of ∼2.5 at 773 K. Nearly intrinsic charge and thermal transport properties of polycrystalline SnSe materials are unveiled for the first time. We confirm that tin oxide layers on the surface of SnSe powder are the origin of paradoxically higher apparent thermal conductivity in polycrystalline samples over single crystal. Our surface oxide removing strategy on polycrystalline SnSe materials reveals even lower thermal conductivity than single-crystal samples and simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high thermoelectric figure of merit (ZT) of ∼2.5.

AB - Tin selenide (SnSe) has emerged as a surprising new material with exceptional thermal transport and charge transport properties such as ultralow thermal conductivity, which give it a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 at around 800 K. These properties, however, have been only observable in well-prepared and properly handled single-crystal samples. Polycrystalline SnSe samples have markedly inferior properties paradoxically with higher apparent thermal conductivity and much lower ZT values than single crystals. The high thermal conductivity in polycrystalline samples has been attributed to surface tin oxides. Based on this hypothesis, we have employed an oxide-removing strategy that involves a chemical reduction process at 613 K under a 4% H 2 /Ar atmosphere. This leads to an exceptionally low lattice thermal conductivity of ∼0.11 W m −1 K −1 in polycrystalline hole-doped SnSe alloyed with 5% lead selenide, even lower than that of single crystals, and boosts the ZT to ∼2.5 at 773 K. Well prepared and properly handled single-crystal SnSe samples exhibit exceptional thermoelectric performance with a record-high thermoelectric figure of merit (ZT) of ∼2.5–2.7 due to the ultralow thermal conductivity. Achieving comparable thermoelectric performance to single crystals in polycrystalline SnSe samples has been the widely sought-after goal. These properties, however, have never been achievable in the polycrystalline samples. Particularly, serious debates have arisen on markedly higher apparent thermal conductivity for the latter. Here, we show that the underperformance of polycrystalline SnSe is mainly due to the presence of tin oxides in the sample. Our H 2 reduction process removes the majority of tin oxide films that ubiquitously cover SnSe grains and eventually unveils the ultralow thermal conductivity intrinsic in this material. It also simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high ZT of ∼2.5 at 773 K. Nearly intrinsic charge and thermal transport properties of polycrystalline SnSe materials are unveiled for the first time. We confirm that tin oxide layers on the surface of SnSe powder are the origin of paradoxically higher apparent thermal conductivity in polycrystalline samples over single crystal. Our surface oxide removing strategy on polycrystalline SnSe materials reveals even lower thermal conductivity than single-crystal samples and simultaneously enhances the hole mobility, electrical conductivity, and Seebeck coefficient, leading to an extraordinarily high thermoelectric figure of merit (ZT) of ∼2.5.

KW - polycrystalline SnSe

KW - surface oxide

KW - thermoelectric

KW - ultralow thermal conductivity

KW - waste heat

UR - http://www.scopus.com/inward/record.url?scp=85062215015&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85062215015&partnerID=8YFLogxK

U2 - 10.1016/j.joule.2019.01.001

DO - 10.1016/j.joule.2019.01.001

M3 - Article

AN - SCOPUS:85062215015

VL - 3

SP - 719

EP - 731

JO - Joule

JF - Joule

SN - 2542-4351

IS - 3

ER -